Training & Support


 

Online Training Classes

For those who want to learn more about the software or mobile, Wrightsoft's Online Training Classes enable you to sharpen your skills, right from your office or home. There is no down time, no costly travel expenses, & you learn the software in small class segments. Online classes are recorded which means if you need to skip a daily session, simply watch it later at your convenience. 
**(Reminder RSU is Windows based software and if running on a Mac, the Mac would need a Windows emulating program as well)

 

 

See below for our currently scheduled 2021 online classes: 

______________________________________________________________________________________________________________________________________________________________________


8-Day Essentials class

Class overview:  Our 8-day 20-hour training program covers the fundamentals of Right-Suite® Universal.  The goal of the class will be to learn how to set up and use RSU for residential load calculations, equipment selection, and duct design. While designed for those who have never used the software before, it is intended as a beginner to intermediate level training and useful for all, but the most advanced skill levels.

Who is this for: Anyone who needs a basic understanding of RSU and/or residential design procedures (Manuals J, S, and D). Users of the Canadian CSA and F-280 standards are also welcome- a separate pre-recorded tutorial detailing the few differences between the methods will be made available upon request. Commercial users who are looking for a slower passed breakdown of RSU’s basic functions may also be interested, however commercial topics will not be covered during this class.
 

Next 8-day session begins March 15th

For more detailed class info and times, click below: 

/Portals/0/March%202021%208-day%20online%20class.pdf

Class Syllabus, click below:

/Portals/0/8%20Day%20RSU%20Essentials%20Syllabus.pdf

__________________________________________________________________________________________________________________________________________________________

 

 

4-Day Advanced class

4-Day Residential Advanced- A 4-Day 10-hour advanced training program where we will focus on topics beyond the everyday use of the software that are not covered in the Essentials Residential Training class. It is intended for experienced RSU users and will maintain a relatively fast pace. Specific topics are listed on the class syllabus.

 

Who this is for: Anyone who can already produce an accurate load and duct design on their own. Those users who find using RSU relatively easy but would like to make it easier. Those users who have issues in specific cases (again see syllabus for a list of topics or contact the instructor at ameaney@wrightsoft.com). 
 

Next 4-day session begins March 29th

For more detailed class info and times, click below: 

/Portals/0/March%2029%202021%204-day%20ADV%20online%20class.pdf
 

Class syllabus, click below: 
/Portals/0/4%20Day%20Advanced%20Syllabus.pdf

___________________________________________________________________________________________________________________________________________________________

 

4-Day Commercial class

4-Day Commercial Class- 4-day, 10-Hour training program where you will learn how to use Right-Suite® Universal for commercial load calculations and duct design. As commercial designs vary much more wildly than residential, this class will be more general than our residential offerings.

 

Who this is for: Anyone looking to provide commercial system design that has a basic working understanding of RSU or similar design software. Users with no prior experience with these types of tools should consider our Essentials class a prerequisite.
 

 Next 4-day session begins April 5th 

For more detailed class info and times, click below: 

/Portals/0/April%205%202021%204-day%20Comm%20online%20class.pdf

 

Class syllabus, click below: 
/Portals/0/4%20Day%20Commercial%20Syllabus.pdf

 

________________________________________________________________________________________________________________________________________________________

 

4-Day Duct class

4-Day Residential Duct Only- A 4-day, 10-Hour training program where you will learn how to design residential duct systems using Right-Suite® Universal. It is a “deep dive” into duct design and will include instruction on both concepts and practices. The class will use Manual D, however the Canadian HRAI method is so similar that it will not affect your class experience.  THIS CLASS WILL NOT INVOLVE LOAD CALULATIONS OR EQUIPMENT SELECTION.

 

Who this is for: Anyone who can already produce an accurate load and select equipment but need help understanding and performing residential duct designs. 
 

 Next 4-day session begins April 12th 

For more detailed class info and times, click below: 

/Portals/0/April%2012%202021%204-day%20resi%20duct%20online%20class.pdf

 

Class syllabus, click below: 
/Portals/0/4%20Day%20Residential%20Duct%20Syllabus.pdf



For questions or to sign up for a class, please call 800-225-8697 x3 or email sales@wrightsoft.com 

 

 

 

______________________________________________________________________________________________________________________________________________________________________


 

Learn about the Trainer - Alex Meaney

 

 

Want more learning tools? Self-train with our on-demand video tutorials

Click Here To Access: MiTek-Wrightsoft Right-University

Technical Questions?

Call or email our dedicated tech support reps. MiTek Wrightsoft is dedicated to the success of our customers and on top of our training classes and videos, we also have a fully staffed technical dept. here for you Monday through Friday 8:30am - 5:30pm eastern time

support@wrightsoft.com
800-225-8697 (opt. 2)

 

FAQ's

Get answers to some of the most common problems encountered by Wrightsoft Technical Support by viewing our FAQ's page.